NTG35 LEDs are recommended for good tint, high CRI and free of greenish tint.
D4K 8*LEDs MULE comes with the aux LED by default (except the UV version), completely flood, no hotspot
Emisar D4K MULE puts a high lumen output but generates a lot of heat at the same time, please acknowledge
before purchasing. Unprotected, flat top battery works only (not included in the price), D4K MULE does not work
with protected battery.
The Lume X1 boost driver upgrade is available for the Luminous SST-20, NTG35, 519A, 5W UV LEDs etc, 1.5 Amps per LED.
Note that the boost driver output is limited in comparison to the default driver, it is more efficient (90-95%) with a longer
running time and less heat.
The Lume X1 is a high power driver - for best performance, recommended to use low ESR, high CDR 21700 batteries
such as Molicel P42A, P45B, Samsung 50S, 40T, or Vapcell T50. Please note that this flashlight is not a toy and must
be operated responsibly.
Features:
• CNC machined from aircraft-grade aluminium
• Unihead construction
• High lumen output and low moon output
• Ramping interface
• Electronic soft touch switch
• Beryllium-Copper springs with 45% IACS superior to stainless steel alloys used for springs with only 2% IACS.
• Temperature step-down
• Waterproof and dustproof to IP67 standard (up to 1 meter)
• Weight:58g
• Dimensions: 103mm(length) * 28mm(head) * 26.5mm(body)
OTF lumen output at start-up for Lume X1 driver:
NTG35 5000K/4200K: 3600lm
NTG35 2700K: 2800lm
NTG35 1800K: 2100lm
519A 5700K/5000K DOMED: 3400lm
519A 4500K/4000K DOMED: 2800lm
519A 3500K/2700K DOMED: 2200lm
519A 1800K: 1800lm
519A 5700K/5000K DEDOMED(about 1300K CCT reduce): 3100lm
519A 4500K/4000K DEDOMED (about 1200K CCT reduce): 2500lm
519A 3500K/2700K DEDOMED (about 1200K CCT reduce): 1600lm
SST-20 6500K: 4200lm
OTF Lumen output at start up for Linear + FET driver
519A 5700K/5000K : 4200lm
519A 4500K/4000K: 3800lm
519A 3500K/2700K: 3500lm
519A 1800K: 2800lm
NTG35 5000K/4200K: 4500lm
NTG35 2700K: 3900lm
NTG35 1800K: 2900lm
SST-20 6500K: 4800lm
This product uses free software of Anduril 2, distributed under the terms of the GPLv3.
Source code is available from https://toykeeper.net/anduril
